Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.

Pages: [1]
Author Topic: Lower control arm value
Posts: 1
Post Lower control arm value
on: October 2, 2016, 00:29

So i am trying to get the outer LCA point in the right spot. //www.racingaspirations.com/mods/7wneqazo I know its distance from the UCA outer point, but can't enter it nor see the measurement . It can be seem in the MacPherson strut setup.

There is only the measurement for upper control arm there as KPI\Spindle offset and KP Hub offset. Both of which can get the UCA in the correct position but are useless to get the LCA point in the right spot.

I can move the LCA outer point up and down and the only thing that changes is the LCA angle in degree. quite useless. It would be much easier to have the measure from LCA & UCA KP/Spindle offset as at the moment i can only guess without trying to work out what the degree angle of the LCA arm is.

Could you please add this functions...thx

Pages: [1]