Clutch-line failure

Followers of this blog will already know I had Another disastrous weekend at Rockingham last time out keeping my 2014 race start tally zero. Issue one was another flywheel bolt failure for which I put a new clutch plate in and replaced with bolts from a reputable manufacturer (and torqued them up). After re-fitting the engine I then found air […]

by huwcdavies July 28, 2014 | , , ,

Ford (Type-E) Rocket Gearbox

[singlepic id=42 w=170 h=120 float=left]The Evo3 is getting a serious gearbox – It’s a Ford Rocket with Quaife maincase + top cover and Tran-X gearset. I thought about mating the gearbox to a standard Fiat bellhousing, but it looked far too heavy, so I’ve opted to stick with the Reliant bellhousing. Thanks to Tony Brazier […]

by Racing Aspirations August 28, 2013 | , , , , , ,

Rocket gearbox / hydraulic release bearing adapter drawings

by Racing Aspirations July 30, 2017 | , , ,

Hydraulic release bearing adapter drawings

by Racing Aspirations August 28, 2013 | ,