Rear wing

30 Sep 2007: Well… Just the mount at the moment. 01 Jan 2008: Rear wing tower chassis mounts added 09 Mar 2008: Rear wing and mounts complete. [nggallery id=15]

by Racing Aspirations August 28, 2013 | , , , ,

Aluminium panelling

13 Jan 2008: Made a start on the panelling… 20 Jan 2008: All panels have been fabricated and are ready for fitting 27 Jan 2008: 95% complete! 11 Feb 2008: All done! Just got to mount the switches in the centre console then rivet it in place [nggallery id=22]

by Racing Aspirations August 28, 2013 | , , ,

Pedal box

07 Oct 2007: Pedal box is in and I’ve added tubes to mark the end of the footwell. I’ve welded a 3mm steel plate between the pedal box and the gearbox, just in case the flywheel disintegrates. 01 Jan 2008: The Hydraulic release bearing requires a stop for the pedal, so I’ve added one! 11 […]

by Racing Aspirations August 28, 2013 | , ,

Racing Aspirations modified STM Phasar chassis

Here’s the finished chassis including ALL brackets (I hope) and painted. [nggallery id=23]

by Racing Aspirations August 28, 2013 | , ,

Engine and gearbox

16 Sep 2007: The engine and gearbox are in place ready for the mounting points. The only engine modification required is altering the angle (in relation to the engine) of the inlet manifold as you can see in the 5th picture. 23 Sep 2007: Engine and gearbox are now secured in position… That was easy! […]

by Racing Aspirations August 28, 2013 | , , , , ,

Steering rack and column

02 Dec 2007: Steering column is in, I just need to connect the steering wheel (waiting for parts). I’ve raised the height of the steering rack as well, to clear the lower wishbone and reduce bump steer. 09 Dec 2007: Digidash mount added, steering wheel quick release added. [nggallery id=18]

by Racing Aspirations August 28, 2013 | , , ,